Jaw Crusher PE-400×600The Jaw Crusher PE-400×600 is used in mining, metallurgy, construction, highway, railway, irrigation and chemical industries, and our jaw crushers have the features of high reduction ratio, even powder sizes, low power consumption and easy maintenance. The crushing strength of the jaw crusher materials is up to 350 Mpa.

Feature Of Jaw Crusher PE-400×600:

1) High reliability
2) Flexible capacity
3) Over-loading protection
4) Easy replacement of wear and spare parts
5) Long service time
6) High efficiency

Jaw Crusher PE-400×600 Operating principle:

The jaw crusher uses motor as its power. Through the motor’s wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.

Working Principle of Jaw Crusher PE-400×600:

The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.

Technical Data Of Jaw Crusher PE-400×600:

Models:PE-400×600
Size of feed opening (mm):400×600
Max feed size (mm):340
Adjustable range of discharge opening (mm):40-100
capacity (m3/h):10-34
Power (kw):37
Weight(t):6.5