Archive for the ‘Crusher Machines’ Category

Jaw Crusher, Stone Crusher, Rock Crusher

Jaw Crusher, Stone Crusher, Rock Crusher:

Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the
largest compression resistance of the material to be crushed is 320MPa. The jaw
crusher is widely used in mining, metall-urgical industry, building material,
highway, railway, and chemical industry.

Working Principle of Jaw Crusher:

The motor transmits power through belt, drives the moving jaw do periodic motion
to the fixed jaw surround the eccentric shaft. The angle between toggle plate
and moving jaw increases when moving jaw moves up. So the moving jaw closes to
the fixed jaw. The stuff will be crushed in this process. The angle of Jaw
Crusher between toggle plate and moving jaw decreases when moving jaw moves
down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of
rod and spring, the products after crushing will be discharged from the outlet
of Jaw Crusher.

Characteristics of Jaw Crusher:

High ratio of crushing, homogeneous final grain size, simple structure, reliable
working condition, easy maintenance, low operating cost.

Technical Data of Jaw Crusher:

      ModelSize of Feeder Opening (mm)Max. Feeding Size (mm)Capacity (t/h)Motor
      Power (kW)Overall Dimensions (mm)Weight (t)
      PE150Ã—250150Ã—2501251-35.5896Ã—745Ã—9350.8
      PE250Ã—400250Ã—4002005-20151150Ã—1275Ã—12402.8
      PE400Ã—600400Ã—60035015-60301700Ã—1732Ã—16536.5
      PE500Ã—750500Ã—75042550-100552035Ã—1921Ã—200010.3
      PE600Ã—900600Ã—90048060-130752290Ã—2206Ã—237016.5
      PE750Ã—1060750Ã—106063080-1801102620Ã—2302Ã—311029
      PE900Ã—1200900Ã—1200750140-2601103789Ã—2826Ã—302554.5
      PEX250Ã—750250Ã—75021010-40221667Ã—1545Ã—10205
      PEX250Ã—1000250Ã—100021015-50301550Ã—1964Ã—13806.5
      PEX250Ã—1200250Ã—120021020-60371560Ã—2104Ã—14157.7

Crusher Machines | Tags: crusher, crushing equipment, Jaw Crusher

Jaw Crusher, crusher, crushing equipment

Jaw Crusher, crusher, crushing equipment :
The Yuanhua Jaw Crusher are ideally suitable for primary and secondary crushing,
with low power consumption and easy maintenance. Every feature of these crushers
has been carefully designed to provide superior quality and performance. The jaw
crushers are widely used for crushing various materials like stone, granite,
trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide,
fused calcium carbide, lime stone, quartzite, alloys, etc. These crushers are
recommended by leading consultants in this field and are used by hundreds of
customers all over the world.

Jaw Crusher Features:

The stone crusher is of various types.
The crushing equipment is suitable for crushing maximum, medium and minimum
stones
The operating principle of crusher is easy to be operated.
The structure of jaw crusher is simple and it is easy to maintain.
Shanghai Yuanhua Company is the biggest manufacturer and exporter in mining and
quarring industry in China,our main product also include: jaw crusher,impact
crusher, Aggregate plant,stone crusher,cone crusher,ultrafine mill,ball
mill,grinding mill,hammer crusher and vsi crusher,etc.
      ModelFeeder Opening (mm)Max. Feeding
      Size
      (mm)Capacity
      t/hMotor
      Power
      (KW)Weight
      (t)

PE150Ã—250250Ã—1501251-35.51.5

PE250Ã—400400Ã—2502005-25152.4

PE400Ã—600600Ã—40035015-6030-377

PE500Ã—750750Ã—50042540-11045-5512

PE600Ã—900900Ã—60048090-18055-7517

PE750Ã—10601060Ã—750630110-32090-11029

PE900Ã—12001200Ã—900750220-450110-13252

PE1000Ã—12001200Ã—1000850315-55011057

PE1200×15001500x1200950400-850160100.9

PEX150Ã—750750×1501255-16153.8

PEX250Ã—750750Ã—25021015-3022-305

PEX250Ã—10001000Ã—25021015-5030-377

PEX250Ã—12001200Ã—250210 20-6037-458.5

PEX300×1300300x130025020-1207511

Crusher Machines | Tags: Jaw Crushers

Jaw Crushers

The series of Jaw crushers are the first choice of crusher, have features of high breaking ratio, even size distribation, plain operation, work safetyly, easy maintenance and convenient delivery etc.

Widely used in departments of mine, smeltery, construction materials, road, railway, irrigation works and chemical industry, etc. The crushing compressive strength of the different of materials are not inexcess of 250Mpa.

For specifications, this machine can be designed according to requirements of users.

Crusher Machines

VSI Crusher

VSI Crusher Features:

1. Advanced double pump oil lubrication system minimize the maintenance frequency
2. High precision roller bearing, smooth main unit running, and long service time
3. Hydraulic lift cap, easy and convenient replacement and maintenance
4. Over vibration alarm system
5. Special dustproof seal system, outside powder is prevented from entering oil mouth
6. Unique feeding method (change between central feeding and central feeding with cascade feeding make “rock on rock” and ‘rock on iron”possible, both crushing and shaping are achieved.
7. Particular material throw head design and reasonable material selection prolong the service time.

Brief Introduction of VSI Crusher:

Â B series Vertical Shaft Impact Crusher is the most advanced impact crusher in modern world. It introduces high quality roller bearing like Sweden SKF and America TIMKEN, which ensure the smooth running of main unit. Hydraulic system used in upper cap, it is easy and convenient to maintenance and replace spare parts. The feeding is our sole patent that using central feeding and central feeding with cascade feeding, the feeding method can change as per needed so as to satisfy customer’s different request.

Working Principle:

Â B series Vertical Shaft Impact Crusher works as below: The materials enter the crusher through feeder hopper, which is divided into two parts, one part entering into the rotating through the middle of distributor impeller at high speed, then is accelerated, and shot through the tunnels around the impeller by the speed of 60-75 meter/second. First the materials will impact with some materials fallen around distributor, hit on the crushing chamber together, then will be rebounded and impact on the top of the crushing chamber, changes its direction and goes down, forms continual material layers with the materials shot from the impeller. Therefore some materials will be impacted, crushed, milled twice or more times in the crushing chamber, then crushed materials will be discharged through the bottom. This can form a closed circulation system; In general, the sand forming percentage increases 20-30% and the product shape is good. Airflow self-circulation in the crushing chamber can eliminate the dust pollution well. It is the first choice in manufacturing sand and its shape correction industries.

Crusher Machines | Tags: Mobile crusher

Mobile crusher

Mobile crusher provides a new field of business opportunities for contractors, quarry operators, recycling and mining applications. It offers high efficient and low cost project plan without environment limit for the client.

This series of mobile crusher incorporates all the equipments together on one truck, which has high chassis, narrower body compared with other trucks, this ensure the crushing plant be easily transported on highways and moved to crushing sites, so it is able to achieve on-site crushing without material transporting from one place to another place. In addition, the lengthened plant is able to transport the final products to the motor-lorry directly. It can start to work soon even in the bumpy ground without reinstallation, so it saves more time and money than fixed crushing plant which needs to install individual equipment one by one.

Compatibility

Mobile crusher can work independently or together with other devices according to coarse crushing or fine crushing requirements. Side discharging chute supports more screening and transporting ways. Diesel generators of the incorporated plant can not only supply power for this plant, but also supply power for other plants of the process flow.

Crusher Machines | Tags: Cone Crusher, Cycle Crusher, Stone Crusher

Cycle Crusher

Cycle is the use of crusher cone crusher within the shell cavity of the cyclic cone movement, resulting extruded materials, the role of splitting and bending, rough pieces of ore hardness or large rock crusher machinery. Broken with the upper cone of the spindle bearing bushing in the beam in the middle, the lower end of the eccentric sleeve is placed in the hole. Rotating sleeve, the broken center line of cone machine cycles for the eccentric movement shattered its action is carried out continuously, so efficiency is higher than jaw crusher. To 70 in the early, large-scale cycles per hour crusher has been able to handle 5,000 tons of materials, the largest feeder of up to 2000 millimeters in diameter.

Crusher cycles in two nesting population means the adjustment and overload insurance: First, the use of mechanical means to adjust the top of the spindle nut, rotating the adjustment nut, cone crusher can be decreased or increased, so that I then changed nesting large or small, overloading, they rely on to cut off the transmission pulley in order to achieve the insurance sales insurance; The second approach is the use of hydraulic breakers hydraulic cycle, the spindle is located in the hydraulic cylinder of the plunger on to change the column Cyprus under the volume of hydraulic oil can be changed on the upper and lower cone crusher location, thus changing the population size of nesting. Overloading, the main downward pressure to force the plunger of hydraulic oil into the hydraulic system of the storage devices for the fall cone crusher in order to increase the nesting population, with the discharge of material into the crushing chamber non-broken materials (iron, wood, etc.) in order to achieve insurance.

« Newer Posts — Older Posts »

February 2012
M	T	W	T	F	S	S
« Jan
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29

Best Jaw Crusher-Crushing Plant Solutions! Yuanhua Jaw Crusher