Cone crusher working principle of the crusher and the same cycle, but only in minor operations broken or broken machinery. In nesting chronology operations of the general uniformity of particle size than the coarse pieces of the high operational requirements, and so in the lower part of the crushing chamber shall be provided in parallel for some areas, at the same time, but also to speed up the cycle of the cone crusher speed, so that materials in the parallel region squeezed by more than once.

Minor operation in comparison coarse broken pieces of the big operation, so the loose after breaking a greater increase in volume. In order to prevent broken cavity may give rise to obstruction, the increase in non-nesting population to ensure that the required size of the nesting of the premise, must be broken by increasing the diameter of the bottom cone to increase the total cross-section of the nesting.

Cone crusher nesting population of small, mixed to the material objects of non-fragmentation result in more accidents, and because of, the fine particle size nesting operation of demanding to be timely in lining wear adjustment after the nesting population, which cone crusher adjustment device of insurance and operating more than necessary to rough broken.

Simon-style spring cone crusher overload insurance, the conical compression spring to force the shell to increase their own in order to increase the nesting population, from non-broken material. Nesting population by adjusting the adjustment to kit, containing solid rotation of the adjustment of housing units can use the thread on its outer shell in order to boost the increase or decrease to change the size of nesting population. Hydraulic cone crusher adjustment of insurance and with hydraulic crusher the same cycle